Payment Terminal Board for Vietnam, WF-SPT-05

TL;DR: Payment Terminal Board for Vietnam

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

Wanlin Manufacturing Group runs the smart payment terminal board programme out of Longgang in Shenzhen, where the twelve WF-SPT configurations are assembled, burned in and packed with their compliance documents. For international market and France importers the practical result is a single bill of materials per production lot and one qualification file per configuration. The France partner gets the compliance file with the first lot - not after the first complaint - because the certification paperwork, the test report and the firmware signing keys are prepared alongside the production order for international market.

WF-SPT-05 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-05 (dual-screen smart payment terminal build for chain checkout) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For France importers sourcing the WF-SPT family, the WF-SPT-05-A variant is the typical configuration for the hypermarket and supermarket chain checkout lanes use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for France Buyers

Unattended formats change the failure model completely. A counter in international market has a human to reboot a terminal; a vending machine, a charging pillar or a parking machine does not, so the watchdog, the scheduled power cycle and the offline transaction buffer stop being optional.

The practical answer for international market buyers is to buy from a source factory that treats documentation as part of the product: CE marking with ANFR radio interface registration reports, ANFR conformity, the compliance set for France and a fixed bill of materials, all shipped with the first lot. AndroidSBC holds the 193400 board sample lot, the production slot and the compliance file on one schedule for international market, so the 7th release of the quarter is a shipment rather than a negotiation.

Competitive Comparison: WF-SPT-05 vs Competing Smart Payment Terminal Motherboards

AndroidSBC publishes this comparison because international market integrators ask for it: what changes when a payment terminal board is built by a source factory that holds its bill of materials, against one that is re-spun on every order.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a international market buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the France integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in international market is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

What France buyers are actually procuring is not a terminal, it is a platform they can repeat across formats. That is why the dual-screen smart payment terminal build for chain checkout is specified with a peripheral contract rather than a feature list.

• Countertop tier: WF-SPT-07 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-03 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-11 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

What the international market buyer should take from the numbers is a procurement rule: specify the peripheral contract and the firmware window first, then negotiate the unit price, because the integration labour is the larger line item in France.

WF-SPT-05 Application Scenarios

The WF-SPT-05 dual-screen smart payment terminal build for chain checkout sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-05-A configuration is the typical build for the hypermarket and supermarket chain checkout lanes use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-01 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-05 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-06 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for international market Buyers

These are the three structures that France partners actually sign, with the engineering scope and the documentation set attached to each one.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

For international market the practical outcome is that the commercial model is negotiable while the technical baseline is not, which keeps a France estate serviceable through growth.

Frequently Asked Questions

Does the smart payment terminal board family support a dual-screen payment terminal build for chain checkout?

Answer: Yes. AndroidSBC holds the dual-screen payment terminal build for chain checkout as a production configuration with a published price, a sample lead time of 1-3 days for international market and a compliance file matched to the parts on the pallet.

Which configurations are available in the WF-SPT family for France buyers?

Answer: Buyers in France can specify RK3576 or any of the eleven sister configurations without re-qualifying the printer, the reader or the scan engine, because the peripheral contract is common to the family.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. A single WF-SPT board handles all three peripherals, and the international market acceptance test is run with the actual printer mechanism and scan engine the project will deploy in France.

What payment scheme certification support does AndroidSBC provide for France?

Answer: Scheme certification in France is handled as documentation work: CE marking with ANFR radio interface registration testing, ANFR conformity and a signed firmware image, all matched to the configuration code shipped to international market.

What is the minimum order quantity and the sample lead time for France?

Answer: AndroidSBC publishes the price list by configuration and volume tier, quotes international market sample orders in 1-3 days, and holds production capacity at 5000 boards per week for France rollouts.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. Firmware customisation covers the ROM, the boot animation, the pre-installed application set and the kiosk lockdown policy, with the signed image delivered alongside the international market production lot.

How are firmware updates delivered to a France device estate after deployment?

Answer: Staged OTA groups are created during qualification, so the international market estate is never updated in a single wave, and every image carries a signature the terminal verifies before it applies.

What shipping terms does AndroidSBC support for France orders?

Answer: AndroidSBC ships EXW, FOB Shenzhen, CIF and DAP terms, with Port of Marseille as the standard discharge port for France orders and the compliance file attached to the carton.

Contact AndroidSBC: Start Your WF-SPT-05 Sourcing Conversation

The France desk at AndroidSBC handles configuration selection, sample dispatch, joint qualification and volume scheduling, and the first call is technical rather than commercial.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

AndroidSBC is the export arm of Wanlin Manufacturing Group and is recruiting France distributors, integrators and brand partners for the smart payment terminal board family. Sample dispatch for international market runs in 1-3 days.