6-Inch Touch Payment Terminal Motherboard with Dual-Band WiFi, WF-SPT-10

TL;DR: 6-Inch Touch Payment Terminal Motherboard with Dual-Band WiFi

AndroidSBC OEM partnership announcement extending smart payment terminal board availability serving international market, France. The WF-SPT-10 smart payment terminal Android motherboard covers the octa-core Android 13 hospitality payment terminal build and eleven sister configurations in the WF-SPT series, spanning the T527 octa-core ARM Cortex-A55 1.8GHz SoC with the ARM Mali-G57 MC1 GPU, 6-inch 1080x1920 MIPI DSI capacitive touch panel, and Android 13 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to international market and France importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

The smart payment terminal Android motherboard family from AndroidSBC is specified for the way France acquiring actually works - contactless first, QR close behind, receipt on paper, firmware signed, estate managed remotely. international market buyers get that as a standard baseline rather than as a paid engineering change. AndroidSBC holds a fixed bill of materials per production lot, which is the part international market buyers care about most: the board that passed qualification is the board that arrives in volume, twelve months later, on the same peripheral contract.

WF-SPT-10 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-10 (octa-core Android 13 hospitality payment terminal build) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For France importers sourcing the WF-SPT family, the WF-SPT-10-A variant is the typical configuration for the hotel front desk and resort reception counters use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for France Buyers

The hidden cost in France rollouts is the integration labour, not the silicon. A board that arrives with a validated printer profile, a documented scan mapping and an SDK that matches the shipped image removes weeks from a international market project plan.

Key handling is the fifth problem. Payment hardware shipped into France has to show how keys are injected, how the secure element is provisioned and how a tamper event is logged, and that documentation belongs in the international market delivery file. AndroidSBC answers those problems with the WF-SPT family: twelve configurations, one fixed bill of materials per production lot, the compliance set bundled with the first carton, and a 7th production slot released this month for international market on the Marseille - Shanghai lane.

Competitive Comparison: WF-SPT-10 vs Competing Smart Payment Terminal Motherboards

This is the comparison AndroidSBC runs with France acquiring partners during qualification: what the board documents, what the board validates, and what the board can still do twelve months after the first pallet lands in international market.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a international market buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the France integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in international market is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

AndroidSBC reads the France market as a documentation market: growth is real, but the programmes go to the supplier whose file clears the acquiring partner first, which is why the octa-core Android 13 hospitality payment terminal build ships with its compliance set rather than after it.

• Countertop tier: WF-SPT-02 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-08 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-04 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

The trend that matters for France is estate size. As terminals multiply per site, remote management stops being a feature and becomes the purchasing criterion, which is where the international market decision is actually made.

WF-SPT-10 Application Scenarios

The WF-SPT-10 octa-core Android 13 hospitality payment terminal build sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-10-A configuration is the typical build for the hotel front desk and resort reception counters use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-12 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-11 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-03 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-10 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for international market Buyers

Three commercial structures cover almost every France programme AndroidSBC runs, from a distributor buying against a price list to a brand shipping its own label.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

Every track ends the same way in France: the board arrives with its test report, its certificate set and its signed firmware image, whether or not it carries the partner brand in international market.

Frequently Asked Questions

Does the smart payment terminal board family support an octa-core 13 hospitality payment terminal build?

Answer: Yes. The octa-core 13 hospitality payment terminal build is a stock configuration on the smart payment terminal board family from AndroidSBC. All twelve configurations are validated against the same Android build and the same peripheral contract before shipment to France.

Which configurations are available in the WF-SPT family for France buyers?

Answer: The family spans T527 plus eleven configurations covering countertop, unattended, outdoor, hospitality and multimedia formats, all documented in one delivery file for international market.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. The board is specified for concurrent panel, printer and scan operation, with the peripheral contract documented so a international market integrator can swap mechanisms without a board change.

What payment scheme certification support does AndroidSBC provide for France?

Answer: AndroidSBC ships the CE / FCC / RoHS set plus ANFR conformity with every lot, and supports CE marking with ANFR radio interface registration testing for the France configuration through the qualification run at the factory.

What is the minimum order quantity and the sample lead time for France?

Answer: Sample orders start at a single configuration and ship in 1-3 days from Shenzhen. Volume pricing begins at 500 boards, and the international market lot is quoted against a published price list.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. Custom ROM, boot logo and pre-install work is scoped as an engineering item and delivered with the board, so the France integrator receives a terminal that boots into its own application.

How are firmware updates delivered to a France device estate after deployment?

Answer: The firmware window is published with the configuration: signed images, staged groups, rollback and a maintenance schedule, all documented for the France operations team.

What shipping terms does AndroidSBC support for France orders?

Answer: Shipments to France clear through Port of Marseille on a weekly lane, with the packing list keyed to the configuration code and the certificate set inside the same carton.

Contact AndroidSBC: Start Your WF-SPT-10 Sourcing Conversation

Partners in international market can start with a single sample configuration or with a full estate specification - both routes end at the same production slot and the same compliance file.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

The Longgang source factory holds capacity at 5000 boards per week for France programmes. international market partners get a frozen bill of materials, a published price list and a compliance file matched to every lot.