RK3588 big.LITTLE Custom Motherboard, WF-C3588-R5, AndroidSBC, Nice

TL;DR: RK3588 big.LITTLE Custom Motherboard

SHENZHEN, China, September 12, 2026 - Lot 177 of the WF-C3588-R5 board cleared final inspection at the Wanlin Longgang plant this week, with 37,770 units consigned to Nice, France.

AndroidSBC unveils the nine-variant custom RK3588 motherboard line spanning custom Android boards, industrial boards, core boards and SOMs, signage, kiosk, robotics, NVR, edge AI and ARM PC work serving Nice, France. AndroidSBC is releasing the full WF-C3588 custom motherboard line for Nice and France: nine variants built on the Rockchip RK3588 octa-core 6 TOPS NPU platform, covering custom Android motherboards, custom industrial boards, core board and SOM carrier design, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. The line ships from the Wanlin Longgang facility with OEM branding, ODM carrier work, and per-lot CE, FCC, UKCA, RoHS and IEC 62368-1 documentation handled in-house.

About AndroidSBC and the Rockchip RK3588 Board Family

The WF-C3588 exists because France buyers kept asking one supplier for two different custom board tiers. Wanlin Manufacturing Group answered by putting nine custom variants on the same Rockchip RK3588 octa-core silicon with 6 TOPS NPU, 8K H.265 video and up to 32GB of LPDDR5. The group runs SMT, burn-in and pre-compliance testing in one Longgang building in Shenzhen, and the export desk holds the certification file rather than passing it back to the importer. For a Nice distributor that means one vendor file, one document format and one MOQ structure across the custom variants it sells.

WF-C3588-R5 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-R5 (Custom Robotics and AGV Control Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For France importers sourcing the WF-Series, the 8GB + 32GB (WF-C3588-R5-B) variant is the typical configuration for the custom robotics controller programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom Robotics and AGV Control Board for France Buyers

The custom robotics and agv control board sourcing question that Nice distributors keep coming back to is continuity across quarters. The Rockchip RK3588 requires a dedicated wafer slot, and a 37,770-unit order placed against broker inventory often turns into a two-month slip with no warning. Then comes the software layer. A board that boots is not a board that holds a certified stack under a 72-hour loop, and France buyers typically find the difference in their own warehouse rather than at the factory.

Documentation closes the list. Buyers in Nice have learned to request the test reports before releasing the deposit, because a mark printed on a carton carries no weight at the port if the Technical File behind it does not exist. AndroidSBC handles it by doing the custom I/O build, the software burn and the documentation at the factory: every lot leaves Longgang with the certified image loaded, a unit-level burn-in barcode, and a Technical File that carries the test reports. The nine WF-C3588 custom variants cover AGV controllers, AMR mainboards, service robots, inspection robots, quadruped platforms, SLAM navigation, robot vision, fleet dispatch terminals, and charging stations with three memory configurations each, which means a Nice integrator can usually match a customer requirement without a bespoke production run.

France importers usually raise compliance first. In France ANFR radio registration is separate from the CE marking, and buyers normally ask for both before releasing a purchase order. AndroidSBC answers it by preparing the CE marking with ANFR radio interface registration documentation for ANFR before the lot is packed, issuing it with the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), and routing the lot through Port of Le Havre on the Le Havre to Yantian lane.

Competitive Comparison: WF-C3588-R5 vs Competing RK3588 Boards

Three groups of board compete for the custom robotics and agv control board socket. The first is catalogue silicon sold on price with no customization route and no certification file. The second is re-badged stock where the seller cannot produce a schematic or a test report. The third is a genuine custom platform on Rockchip RK3588 with the engineering desk, the burn-in rack and the certification file in one Longgang building. The WF-C3588-R5 sits in the third group.

• vs paired PC-plus-MCU controllers: the WF-C3588-R5 runs vision, navigation and fleet logic on one board and hands only the power stage to the drive electronics.
• vs generic SBC robot builds: the CAN, multi-serial and real-time options come validated on the reference carrier instead of being patched in by the integrator.
• vs cloud-vision robots: SLAM and obstacle detection stay on the 6 TOPS NPU, so the robot keeps navigating when the warehouse WiFi drops.
• vs module resellers: custom I/O changes are executed by the Longgang engineering desk with the test bench that will validate them.

Global Custom Robotics Control Board Market Trends

Order timing in France now follows the Custom Robotics Control Board curve rather than the old annual budget cycle. MarketsandMarkets sizes the Edge AI hardware segment at USD 26.9 billion for 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, 2025-2030), and that growth is the reference point France buyers use when they argue about RK3588 allocation. In Nice, it shows up as three distinct demand patterns across the WF-C3588:

• Warehouse AGV fleet: an automation vendor runs SLAM and fleet dispatch on the board with dual GbE back to the coordinator.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-R5 board carries that headroom without a board change.
• Inspection quadruped: a platform maker runs gait control and inspection vision on isolated cores under PREEMPT_RT.

Channel analysts tracking the Custom Robotics Control Board category note that allocation discipline, not unit price, has become the deciding factor for buyers who need a twelve-month programme to hold.

The common thread for France is that single orders are giving way to blanket agreements released monthly, which is what a twelve-month custom board programme needs in order to avoid a gap in the middle of the year.

Partner Success Story: Kestrel Signage Works in Nice, France

Kestrel Signage Works, a digital signage OEM serving the France market, deployed 9,700 custom WF-C3588-S3 signage boards for a multi-market DOOH and indoor network. The rollout covered the warehouse agv fleet, inspection quadruped, and agriculture robot workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 9,700 custom WF-C3588-S3 signage boards for a multi-market DOOH and indoor network
• Region: Nice, France
• Models used: WF-C3588-R5 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Ningbo-Zhoushan with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Le Havre via the Le Havre to Yantian lane

"We came with a block diagram and a deadline. AndroidSBC turned it into a quad-output carrier with our connector set and our boot animation, and the first production lot landed inside the fifteen-to-thirty-day window they quoted at schematic sign-off."

- Maarten de Vries, Director of Operations

Field Report: a control room in Nice where 37,770 units of the WF-C3588-R5 board are driving a video wall installation

Reporter Tan Bao, on the ground in Nice, France. The integrator mounted the WF-C3588-R5 boards in the control room rack and spent two days on display mapping and colour matching across the wall. The boards held four independent outputs through the full commissioning window without a thermal throttle, and the operator console was handed over on schedule.

The line supervisor logged a 41-minute changeover between the WF-C3588-R5 run and the next lot, which is the kind of number that decides whether a mid-quarter top-up order can be absorbed.

The inspection confirmed three things on the spot: the WF-C3588-R5 units hold the burn-in with a yield above 98.72 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with ANFR radio interface registration administered by ANFR, cleared for entry at Port of Le Havre on the Le Havre to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that France importers can hand straight to their customs broker.

Filed by Tan Bao, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-R5 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-R5 (Custom Robotics and AGV Control Board) as the lead SKU for Nice and France programmes:

• Warehouse AGV fleet: an automation vendor runs SLAM and fleet dispatch on the board with dual GbE back to the coordinator.
• AMR delivery robot: a service robot pairs NPU navigation with a custom carrier that routes the sensor stack.
• Inspection quadruped: a platform maker runs gait control and inspection vision on isolated cores under PREEMPT_RT.
• Cleaning robot fleet: a facility operator runs coverage planning and obstacle detection locally with nightly model updates.
• Charging station control: the board coordinates dock sequencing, battery telemetry and fleet handshakes.
• Agriculture robot: a field robot runs row detection on the NPU offline, kilometres from the nearest access point.
• Remote monitoring link: a fleet operator streams diagnostics over the optional 5G seat to a central depot.
• Robot vision retrofit: an older fleet gains NPU vision without replacing the drive electronics.

Partnership Models for Nice Buyers

AndroidSBC runs three engagement tiers for France importers and brand owners sourcing a custom robotics and agv control board on the WF-C3588 custom line:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Every tier draws on the same Longgang line and the same certification desk. A Nice first order on the WF-C3588-R5 normally lands on the 8GB + 32GB (WF-C3588-R5-B) configuration at MOQ 5,000 units per shipment, with standard samples in 1-3 days and a 15-30 day mass-production window on custom builds.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: The customization scope runs across five layers: hardware (PCB, PCBA, I/O, memory, storage), thermal (fanless passive, vented, wide-temperature, conformal coating), software (custom ROM, custom Linux, pre-installed apps, OTA), branding (logo, packaging, boot animation, SKU labels), and compliance (the certification file assembled for the exact configuration you ship). Most France partners change two or three layers on a standard variant rather than commissioning a full custom run.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Custom ROM, custom BSP and custom SDK work are all part of the ODM tier. AndroidSBC builds the Android image (12, 13, 14 or 15, GMS or AOSP), ports the Linux BSP to your carrier revision, and releases the SDK modules your team needs under NDA. The engineering desk carries the port itself, so a France integrator is not left debugging an unmodified vendor BSP against a carrier it was never designed for.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: Yes. The RK3588 NPU runs INT4, INT8, INT16, FP16, BF16 and TF32, and AndroidSBC supports model deployment through the Rockchip RKNN-Toolkit2, with quantization from PyTorch, ONNX, TensorFlow, Caffe and MXNet. As part of the ODM tier, the engineering desk walks your model from framework to RKNN format and validates it on the actual board configuration you are shipping, not a reference unit. Model files are versioned so a retrained model can be pushed to field units through OTA without a board swap.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: The structure is deliberately two-speed: 1-3 days for a standard-variant sample so a France project team can start immediately, and 15-30 days to mass production on a custom run once the design freezes. MOQ is 5,000 units per shipment on standard variants, with custom and pilot quantities negotiated against the annual volume commitment.

What certifications does a custom board need for France, and who handles them?

Answer: Certification is part of the customization scope, not an afterthought. The in-house file covers CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 with test reports dated inside twelve months, plus GMS and EDLA tracks for custom Android and display products. The file is built for the exact configuration you ship, which matters for a custom board because a test report on a different memory fit is not a valid report at all.

How long will AndroidSBC keep supplying a custom board?

Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android and Linux firmware tracks and OTA infrastructure for pushing firmware and RKNN model updates to deployed units. Long-lifecycle programmes in industrial, signage and robotics usually ask for the term in writing, and it is written.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton labelling and pallet configuration follow FBA inbound requirements, the export declaration names the Wanlin Longgang source factory as the place of origin, and each pallet carries a per-unit barcode that traces back to the burn-in record for downstream RMAs.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-C3588-R5 unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in and configuration record, partners typically receive a root-cause note with the replacement rather than a silent credit.

Contact AndroidSBC: Start Your WF-C3588-R5 Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-C3588 custom motherboard line. Nice and France importers, brand owners and distributors who want the custom robotics and agv control board direct from the Longgang plant can reach the export desk at:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with ANFR radio interface registration for France, administered by ANFR, entering at Port of Le Havre on the Le Havre to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For a customization conversation, it helps to state the target annual volume, the I/O and memory changes required, the certification scope (CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, GMS, EDLA or EN 55032 plus EN 55035), and the preferred Incoterm (FOB Yantian, FOB Shekou, CIF, DDP, or DDP-Amazon). The export team returns a per-lot quote plus the variant-by-variant MOQ matrix for the WF-C3588 line within two business days.